See Us at work watch our Video

The plastering process typically involves the following steps:

1. Surface preparation: The surface to be plastered is cleaned, repaired, and primed to ensure good adhesion.
2. Application of scratch coat: A scratch coat of plaster is applied to the surface using a trowel. This layer serves as a base and helps the next layer adhere to the surface.
3. Application of brown coat: A second layer of plaster, called the brown coat, is applied over the scratch coat. This layer is typically thicker and used to create a smooth, even surface.
4. Application of finish coat: A final layer of plaster, called the finish coat, is applied over the brown coat. This layer is used to achieve the desired texture and appearance of the finished surface.

Additional steps may be required depending on the specific project and desired outcome, such as applying multiple coats of each layer or using a one-coat plastering technique. It's important to work with a professional plastering contractor who can assess your project needs and recommend the appropriate steps to achieve the best results.

Dry rot repair typically involves the following steps:

1. Inspection: The damaged area is inspected to determine the extent of the damage and identify the source of the moisture that caused the dry rot.
2. Removal of damaged wood: The damaged wood is removed and any remaining spores are killed to prevent further spread of the rot.
3. Repair or replacement: The damaged area is repaired or replaced with new wood, depending on the extent of the damage.
4. Reinforcement: Reinforcing materials, such as metal brackets or epoxy, may be used to provide additional support to the repaired or replaced wood.
5. Finishing: The repaired area is finished to match the surrounding area, which may involve applying paint or other coatings.

The number of layers involved can vary depending on the extent of the damage and the repair method used. It's important to work with a professional contractor who can properly assess the damage and recommend the appropriate repair solution.

Stucco is a type of plastering material that is commonly used to cover exterior surfaces of buildings. The specific number of layers and steps involved in applying stucco can vary depending on the specific project and the desired outcome, but here is a general overview of the stucco application process:

1. Preparation: The surface to be stuccoed is cleaned, repaired, and primed to ensure good adhesion.
2. Scratch coat: A base layer of stucco, called the scratch coat, is applied to the surface with a trowel. This layer is roughed up with a scratcher to provide a key for the next layer of stucco.
3. Brown coat: A second layer of stucco, called the brown coat, is applied over the scratch coat. This layer is leveled and smoothed out with a trowel.
4. Finish coat: A final layer of stucco, called the finish coat, is applied over the brown coat. This layer is usually colored and textured to achieve the desired appearance.

Depending on the specific project and the desired outcome, additional steps may be required, such as the application of a bonding agent, the use of reinforcement mesh, or the addition of various additives to the stucco mix. It's important to consult with a professional stucco contractor to determine the specific steps needed for your project.